ISSN 1673-8217 CN 41-1388/TE
主管:中国石油化工集团有限公司 主办:中国石油化工股份有限公司河南油田分公司
曾洪图, 时江涛, 马朝俊, 周山红, 张顺. 2002: 浅层大位移三靶定向钻井技术在泌268井的应用. 石油地质与工程, 16(05): 41-43+2-1.
引用本文: 曾洪图, 时江涛, 马朝俊, 周山红, 张顺. 2002: 浅层大位移三靶定向钻井技术在泌268井的应用. 石油地质与工程, 16(05): 41-43+2-1.
2002: Application of Shallow Long Extended Reach Di-rectional Drilling Technolog y with Three Targets in Well Bi 268. Petroleum Geology and Engineering, 16(05): 41-43+2-1.
Citation: 2002: Application of Shallow Long Extended Reach Di-rectional Drilling Technolog y with Three Targets in Well Bi 268. Petroleum Geology and Engineering, 16(05): 41-43+2-1.

浅层大位移三靶定向钻井技术在泌268井的应用

Application of Shallow Long Extended Reach Di-rectional Drilling Technolog y with Three Targets in Well Bi 268

  • 摘要: 泌268井是河南油田的第一口浅层大位移三靶定向探井,井深2367m、垂深1561m、井底位移1485m、最大井斜68.69°,造斜点466m,地层浅、井斜大、稳斜井段长,对井眼轨迹控制、完井作业提出了很高要求。通过在地质工程设计、轨迹控制、钻具组合及安全钻进措施等方面,采取合理严格的技术措施,成功完钻,比设计钻井周期缩短了12.45d。

     

    Abstract: Well Bi 268,the first shallo w long extended reach directional exploratory well with three targets,has a wel l depth267m,vertical depth1561m,bottom hole displace-ment 1485m,m aximum borehole deviation68.69°and kick-off point 466m.The targets ar e shallow,hole deviation is large,and angle holding interval is long,thus the re-quirements to well trajectory control and well co mpletion operation are very high.Strict measures were taken in re-spects of ge ologic engineering design,trajectory control,drilling assemblage and safe dril ling.The well was success-fully completed and frilling cycle was reduced12. 45d.

     

/

返回文章
返回